Domenic Duck KAL - Afterthought Prep, Pick Up and Finishing!

Today we're going to move from something ressembling a wide wooden shoe to something more duck-like. 

As before, click on any gridded photo for a larger version. 

 

Centered Doubled Decreases (cddc)

A centered double decrease (cddc) decreases two stitches with center stitch making a clear line up the middle. Work a cddc as follows:

  1. Work until there is one stitch before the marked stitch
  2. Slip the unworked stitch and marked sts together as one, as if you were knitting them
  3. Knit the next stitch normally
  4. Pass the two slipped stitches over the knitted stitch.

The line of the center of the decreases should be pretty clear to follow, but feel free to move up the stitch marker if you find it helpful. 

Preparing for an Afterthought Appendage

I like working wings/legs/etc in an afterthought style, because it means that the appendage is firmly attached to the body, no grafting or seaming needed. Meaning it stands up all the stronger to any grabby hands. 

To set up for an afterthought:  

  1. Put down your working yarn, but do not cut. 
  2. Knit the correct number of stitches in scrap yarn.
  3. Slip sts in scrap yarn back to left hand needle.
  4. Knit the stitches again with working yarn and carry on as usual. 

I like to keep the tails of the scrap yarn on the outside of the body, as this helps when you need to pick it out. 

Picking Up An Afterthought Appendage

To pick up the stitches for an afterthought appendage, work as follows:

  1. Using a spare needle, pick up the right side of each stitch just below the scrap yarn stitching, picking up one stitch for each scrap yarn stitch.
  2. Repeat for the row of stitches just above the scrap yarn.
  3. Using a spare knitting or tapestry needle, pick out the scrap yarn. You should be left with the same number of stitches on each needle.

The first few rounds after you pick up will be fiddly, because there's not a lot of give because the body is already stuffed. It's a bit easier if you use magic loop and isn't a problem after those first few rows.

Making the Eyes (French Knots)

Make the facial features before you do (or at least graft shut) the beak, as it will be easier to hide the ends. 

  1. Secure thread at inside of head.
  2. Bring up needle through fabric at desired position.
  3. With needle pointing away from fabric, wrap thread around shank of needle 2-3 times. (The more wraps, the bigger the finished knot).
  4. Holding onto the yarn tail until it becomes too short, push the needle down through the fabric one half-stitch over from where it came up. Pull snugly against fabric.

Repeat steps 2-4 for second eye. You can also add eyebrows, eyelashes, etc. at this point.

Grafting Openings Shut (Kitchener Stitch)

Kitchener Stitch is my favorite way to seamlessly close together these afterthought openings to do so:

  1. Cut the yarn, leaving a long tail and thread a tapestry needle.
  2. Place all stitches on two needles, with an equal amount on each needle and the needle tips pointing right. 
  3. Put tapestry needle through first stitch on front needle (closest to you) as if to knit and pull tail through, removing the stitch off the knitting needle.
  4. Put tapestry needle through next stitch on front needle as if to purl. Pull tail through, but DO NOT remove stitch from knitting needle.
  5. Put tapestry needle through first stitch on back needle (farthest from you) as if to purl and pull tail through, removing the stitch off the knitting needle.
  6. Put tapestry needle through next stitch on back needle as if to knit. Pull tail through, but DO NOT remove stitch from knitting needle.

Repeat Steps 3-6 until all stitches have been grated together. Adjust tightness of tail so join is smooth before weaving in ends.

Domenic Duck Tutorial

Congratulations! You now have all the techniques you need to finish your duck!! 

If you're on Instagram, please tag me @mscleaver or via #domenicKAL or post in the Ravelry Group by April 21st to be eligible to win prizes! 


Print Friendly and PDF Follow
follow us in feedly

Domenic Duck KAL - W&T Short Rows

Short rows are one of the most valuable shaping tools in a knitter's toolbox. With them you can turn heels, add bust darts, raise the back neck of a sweater, and make an adorably curly duck tail.

There are numerous ways to do short rows, but I'm sticking with the basic wrap and turn (W&T) version here. 

W&T Knitwise

  1. Knit number of stitches as indicated in pattern before wrap.
  2. To Wrap, slide next unknitted stitch to right hand needle, bring yarn to front, as if to purl.
  3. Slip st from right hand needle back to left hand needle, keeping yarn at front of work.
  4. Pull yarn to back of work. The first stitch on the left hand needle should now have a nice wrap around it.
  5. Turn work to opposite side, with yarn as to purl.

W&T Purlwise

  1. Purl number of stitches as indicated in pattern before wrap.
  2. To Wrap, slide next unworked stitch to right hand needle, bring yarn to back, as if to knit.
  3. Slip st from right hand needle back to left hand needle, keeping yarn at back of work.
  4. Pull yarn to front of work. The first stitch on the left hand needle should now have a nice wrap around it.
  5. Turn work to opposite side, with yarn as to knit.

As you work the short rows across the tail, you'll start to form a triangle shape at one end, with a neat little wrap around each stitch.

Curling the Tail

To give the tail it's adorable curl, the outside is going to need to be longer the the inner part of the curl. So you'll need to work a few short rows where the row stays the same length/doesn't get shorter. In this case, you will be re-wrapping a stitch you've already wrapped once. 

Picking up the Wraps

Depending of the short row, you may have one, two, or three wraps to pick up as you work your way back out to longer rows. 

Knitwise

  1. Knit to first wrapped stitch. 
  2. Using the right hand needle, pick up all wraps and slide them onto the left hand needle, making sure not to drop the original stitch that was wrapped.
  3. Knit through the stitch with all its wraps. This may be a k2tog, k3tog, or k4tog, depending on the number of wraps. 

Purlwise

  1. Purl to first wrapped stitch. 
  2. Using the right hand needle, pick up all wraps and slide them onto the left hand needle, making sure not to drop the original stitch that was wrapped.
  3. Purl through the stitch with all its wraps. This may be a p2tog, p3tog, or p4tog, depending on the number of wraps. 

As you work the short rows back out, you'll close off the top of the triangle and have and cute little tail! Your project will also look like a shoe for a wide-footed gnome. 

Up next: shaping the neck and setting up for afterthought appendages. 



Print Friendly and PDF Follow
follow us in feedly

Linen Verdant

It's linen month over at Quince & Co., and I'm pleased to have two designs in their latest collection of warm-weather knits: Linen Verdant

As in it's woven form, knitted linen fabric has such a beautiful texture and drape on it's own that I like to keep the designs simple. Both the Ripley tank and the Snell tee are knit from the bottom up in the round with minimal finishing, and a little decorative touch to make it special. 

Make sure to include some positive ease for that extra breezy feel, field of wild grasses not required.

You can buy both patterns as part of the Verdant Collection at Quince & Co. or as individual patterns in my shop or on Ravelry


Print Friendly and PDF Follow
follow us in feedly

Introducing the Tributary Shawl

I'm pleased to introduce the Tributary - part of Quince and Co's Piper Week and the third in my Songbird series of shawls inspired by music.

"God cage the songbird
Before the feathers run brown
God bar the windows
That we may though hollow be sound

And this island shall be shackled to her waters
Here we vow never to change
Here we will stand at last for something
With no desire to pretend"

- The Low Anthem

Inspired by lyrics from the Rhode Island-based folk band The Low Anthem, this traditional triangle shawl plays with closure and openness, with the body knit in Stockinette st for the first third, before opening up into a wide lace border.  The strong lines of double yarn-overs both open up the fabric, evoking bars, and the final pattern has a feather-like texture, the connection the two lace patterns giving the shawl a feeling of downward motion, and falling feathers.

The pattern is available for $6.50 USD from the following online shops:

MsCleaver.com   ||   Quince & Co.   ||      Ravelry

 

If you knit it and participate in social media, use #quincetributary to share and/or tag me @mscleaver !  

I'd love to see your version!!!


Print Friendly and PDF Follow
follow us in feedly

Introducing the Cresting Waves Shawl

I was honored when Beatrice Perron Dahlen invited me to contribute to her MAINE knits book, a celebration of sea, farm and wild in Maine. It's really a thrill to be represented alongside some of my Maine knitting friends and peers, like Carrie Bostick Hoge, Bristol Ivy, Cecily Glowik MacDonald, Mary Jane Mucklestone, Beatrice Perron Dahlen, Alicia Plummer, Leila Raabe, Elizabeth Smith, and Kristen TenDyke.  

My contribution is the Cresting Waves shawl, knit in String Theory Yarn. As the name indicates, I went with the sea as my inspiration and came up with this simple shawl.  As shown, the shawl only uses 1 skein/345 yards of fingering weight yarn, making it the perfect project for that special skein. Instructions are also provided for making deeper versions for a more generous shawl. 

The lace border is worked first, then stitches are picked up along the edge for the body, which is worked in short rows. It's a great project for those nervous about tackling lace, because if you mess up a lace row, it's only about 20 stitches to pull back. You can read more about my thoughts on knitting, Maine and this design over on Bea's blog - Thread and Ladle. You can also pre-order the book on the site, which will ship in January. I've had a chance to see a proof of the whole book, and it really is lovely, filled with great patterns and beautiful photography. 

If you'd like, you can also give the pattern some love, or queue it up on Ravelry, where Bea will be releasing a preview of each of the patterns over the coming days. 

More to come on the book in January, including information about a launch party! :) 


Print Friendly and PDF Follow
follow us in feedly

Indie Design Gift-A-Long 2016 Sale

Gift-A-Long Sale!!
For the second year, I'm participating in the Indie Design gift-a-long on Ravelry. The Indie Design Gift-A-Long is a 6 week long KAL/CAL of holiday gifts made from patterns designed by hundreds of independent designers.

From November 22nd at 8pm (US-EST) through November 30th at 11:59 pm (US-EST) I, along with many 334 other indie designers will be discounting between 5 - 20 of our patterns 25% for this event with the code giftalong2016. The code is good both in my Ms. Cleaver and Ravelry shops. 

In addition to the giftalong patterns, I'll also be discounting all kits in my shop by 10% for same period (Nov 22-30).

You can find all 20 of my discounted patterns above, or here:   

Ms. Cleaver Creations    ||    Ravelry

While the knit-a-long portion (with numerous prizes!) of the Gift-A-Long is ongoing, the sale ends tomorrow, so I've curated some of my favorite offerings from other designers to consider in the following Pinterest board, a few of which I'll be snagging myself. :) 

Happy Holiday Knitting!!


Print Friendly and PDF Follow
follow us in feedly

Tutorial: Knitting an afterthought leg (or thumb or heel)

Afterthoughtlegtutorial (1).png

I like to knit my stuffed animals as seamlessly as possible. Seams can be weak spots, particularly when being pulled and dragged about by little hands. So I've designed all my stuffed animals with seamless appendages. They're set up the same way you would do an afterthought heel on a sock, or an afterthought thumb on a mitten, but if you haven't done it before, it can be a bit fiddly. So let's walk through it together, shall we? 

Want to knit a cuddly and strong seamless friend of your own? I'll be selling Bradac kits this Saturday (11/19) at Knitwit yarn shop in Portland or check out my toy designs below!


Print Friendly and PDF Follow
follow us in feedly

Quick Winter Knits and a Pop-Up Shop!!

West Branch Cowl by Leah B. Thibault
Bradac Polar Bear Kit
Ms. Cleaver Creations Project Bag
Eiswasser by Leah B. Thibault
West Branch Cowl by Leah B. Thibault
Eiswasser by Leah B. Thibault
West Branch Cowl by Leah B. Thibault
Eiswasser by Leah B. Thibault
Ms. Cleaver Creations Project Bag
Bradac Polar Bear design by Leah B. Thibault

I've been a busy little beaver of late. Without any looming deadlines, I've had time to just play with my knitting design, and in doing so, I've come up with a lot of fun, quick accessories to share with you, just in time for your own holiday knitting.

First up is Eiswasser: this spiraling knit toque is inspired by the snowpack on top of the mountains that melts into rivulets, which turns into streams and rivers. Eiswasser (or ice water in German) recreates those streams in a densely-cabled toque that is incredibly warm, despite its name and lighter-weight yarn. Top it off with a fluffy (faux) fur pompom or leave the spiraling crown open to view. The sample is knit in Manos Del Uruguay Milo in Lisboa a Merino/Linen blend that is divine to knit with and has a beautiful rustic look, but soft feel. Never have I been more sad to hand a sample off than I was when I dropped this off at Knitwit last week.

Next in the quick-knit accessory line is the West Branch cowl. Designed to show off a special skein of handspun or hand-dyed yarn, this simple, but gracefully cozy cowl is the perfect knit for those looking to learn lace or who just want to use a special skein. A few big buttons add an extra fun with minimal effort. This cowl works in a variety of fiber weights. The pink sample, shown in One Lupine’s West Branch in Berry, is a worsted weight wool/silk blend available Exclusively at Knitwit, while the white sample is an all-wool Aran weight yarn of my own handspun. Very different in drape, but equally beautiful.

Pop-Up Shop

In other big news, if you've been poking around the website, you may have noticed I now sell a curated range of craft supplies and kits! I'm very excited to share this new endeavor with you all and will be adding more items in the coming months. If you're in the Southern Maine area, I'd invite you to join me at Knitwit in Portland this Saturday from 1-3, where I'll be having a mini pop-up shop as part of their holiday knitting kick-off event. I'll be selling project bags and polar bear kits, and have sample of several designs to try on. 


Print Friendly and PDF Follow
follow us in feedly

Introducing Ezekiel Saw

Every so often, a design bursts, Athena-like, fully formed from its creator’s head. Ezekiel Saw is one such design for me. I had a clear vision of a triangle shawl in two-similarly toned, but distinct colors with detailed open lace bands.

When I went to Knitwit, my local yarn shop, to scout yarns to bring that vision to life, I was immediately entranced by the drape and subtly marled palette of CoopKnits’ Socks Yeah! yarn.

The Wave and Wheel lace pattern of the bands creates a wheel within a wheel motif, reminiscent of an old folk song about an altogether different kind of vision that we used to sing in my high school choir: “Ezekiel Saw Da Wheel.”

“Ezekiel saw da wheel;
Way up in the middle of the air.
Now Ezekiel saw da wheel in a wheel;
Way in the middle of the air.

And the big wheel run by Faith, good Lordy;
And the little wheel run by the Grace of God;
In the wheel in the wheel in the wheel good Lord;
Way in the middle of the air.”

I'm also pleased to say that for the first time, I'm offering kits for one of my designs!

The Ezekiel Saw kit is exclusively available through MsCleaver.com and comes with all the yarn needed to complete the project, a printed pattern, and a sturdy cotton drawstring project bag. You can also purchase the suggested needles if desired. 

The PDF pattern is available for $6.00 USD from the following online shops:

LoveKnitting (coming soon)   ||    Ms. Cleaver Creations    ||    Ravelry

If you knit it and participate in social media, use #ezekielsaw to share or tag me @mscleaver !  

I'd love to see your version!!!

Photos by Bristol Ivy


Print Friendly and PDF Follow
follow us in feedly

Three Needle Bind-Off - a quick tutorial

Three Needle Bind Off Tutorial - Ms .Cleaver Creations
Three Needle Bind Off Tutorial - Ms .Cleaver Creations
Three Needle Bind Off Tutorial - Ms .Cleaver Creations
Three Needle Bind Off Tutorial - Ms .Cleaver Creations
Three Needle Bind Off Tutorial - Ms .Cleaver Creations
Three Needle Bind Off Tutorial - Ms .Cleaver Creations
Three Needle Bind Off Tutorial - Ms .Cleaver Creations
Three Needle Bind Off Tutorial - Ms .Cleaver Creations
Three Needle Bind Off Tutorial - Ms .Cleaver Creations

A few people knitting Atlee had mentioned that they'd never done a three needle bind-off before, so I thought I'd post a real quick tutorial. Once you see how easy it is, you'll be kicking yourself for not learning it ages ago (I did!). Prefer to see it in motion? There's a quick video on my Instagram.


 

 

Print Friendly and PDF Follow
follow us in feedly